Photo Light

A minimalistic 4x4 NeoPixel matrix controlled by an RP2040 Stamp. The board contains a three-way switch, a Qwiic connector, a LiPo connector, USB Type-C socket, and a power switch.

As the Photo Light is powered by the Stamp, you can run CircuitPython on it, as well as Arduino.

Make sure you use a 3.7V/4.2V LiPo with the Photo Light.

The board contains four M2.5 mounting holes, which could be used to attach a diffuser or a case to hold the battery.

Photo Light

Last modified September 23, 2022